Setting The Wireless Id - Sekonic RT-GX Operating Manual

2-3

Setting the Wireless ID

To use Wireless ID with Godox radio system, the same Wireless ID should be set to the
light meter. If your receiver (flash) doesn't have Wireless ID setting, please make sure to
select OFF.
Operation
1.
Select any Radio Mode in the Measuring Mode Screen.
( P13 "
2.
Touch the [Tool Box] Icon (
The Tool Box Screen is displayed.
3.
Touch the [Next Page] Icon (
Tool Box showing [Wireless ID].
4.
Touch the [Wireless ID] Button.
The Wireless ID Setting Screen is displayed.
[Measuring Screen]
[Tool Box] Icon
* When the Multiple (Cumu.) Flash mode is selected, the displayed
information are different from those shown above.
",  P24 " ",  P28 "
[Tool Box Screen]
11
" P35 "
) on the Measuring Screen.
) of the Tool Box to display the
Page 1
To Next Page
2. About Godox Radio System
")
[Tool Box Screen]
Page 2
●