Table of Contents
Advertisement
2)
How to use Flash Power Control
1.
Touch the [Flash Power Control] Icon (
Screen.
The Flash Power Control Screen is displayed.
Take measurements by placing the meter at the subject's position with the light receptor
(retracted lumisphere) facing toward the light sources of main light and fill light directly.
Adjust the measured values for the desired lighting ratio. (Figure 1. of Piv)
2.
Select a [Group] Button (default setting: A to E) on the Flash
Power Control Screen.
Only flash unit with the receiver set to the selected Group will fire.
[Measuring Screen]
[Flash Power Control] Icon
NOTE
To select the group which is not displayed, go to Select Group Screen and select (A to F, 0
to 9). ( P8)
[Flash Power Control
Screen]
[Group] Button
16
2. About Godox Radio System
) on the Measuring
[Flash Power Control
Screen]
Group Display
●
Advertisement
Table of Contents
