Hss (High Speed Synchro) Flash Radio Triggering Mode; How To Use Flash Triggering - Sekonic RT-GX Operating Manual

2-4-3

HSS (High Speed Synchro) Flash Radio Triggering Mode

Select this mode to measure the brightness of a flash activated in HSS (High Speed
Synchro) mode.
Detects flash brightness after Measuring Button is pressed to send radio transmitted
signal to radio receiver connected to flash. Displays F-Stop value.
Depending on the radio system in use, the meter controls the output power of flash unit.
Operation
1)

How to use Flash Triggering

1.
Touch the [Measuring Mode] Icon on the Measuring Screen.
The Measuring Mode Screen is displayed.
2.
Touch the [HSS (High Speed Synchro) Flash Radio Triggering
Mode] Icon (
When it is selected, the display changes to the Measuring Screen.
[Measuring Screen]
[Measuring Mode] Icon
3.
Set the light receiving method.
Switch to the incident light, extended lumisphere (
( ), or reflected light.
) in Measuring Mode Screen.
[Measuring Mode Screen]
28
2. About Godox Radio System
[Measuring Screen]
)/retracted lumisphere
●