Install The Card In Another Pci Slot - Delta PCI-DMC-A01 User Manual

Chapter 2 Installation Guide

2.7 Install the Card in Another PCI Slot

As suggested in section 2.6, if you need to switch the PCI-DMC-01 card to another free
PCI slot system, please discharge any static electricity, disconnect the system power
supply then remove the PCI-DMC-01 card. Follow the instructions in section 2.2.3 to
re-install the card.
Once you have switched the PCI-DMC-01 card to another free PCI slot on the system,
check to see if the drivers have been installed on the system before your restart the
system. If they are not yet installed, please skip the following section and go to section
2.8 "Manual Driver Installation".
When the PCI-DMC-01 card has been properly installed in the new PCI slot and the
system is restarted, the "New Hardware Wizard" window (see Figure 2.25) will pop-up.
Please select "No, not this time" then click on "Next" to continue.
July 2014
Figure 2.25
PCI-DMC-A01/B01 User Guide
2-19