Table of Contents
Advertisement
Changing the Angle of the Display Unit
You can adjust the angle of the display by tilting it forward or back, and to the left or right. Hold the stand with
your hand and move the display unit.
It can be tilted up to 40 degrees forward or back and up to 45 degrees to the left or right.
Turning the Power On/Off
Since this product is bus powered, there is no power switch. The product takes its power from the printer or the
computer through the USB cable.
40°
Do not attempt to move the display to an angle outside the allowable range. Doing so may cause
the display to malfunction.
• When the product is powered, an EPSON logo is displayed.
• Even when the power LED of the printer is off, the display may stay on if it is still powered
through the USB connector.
45°
45°
Chapter 2 Handling
14
Advertisement
Table of Contents
