Handling; Connecting To The Printer - Epson DM-D70 Technical Reference Manual

Handling

This chapter describes basic procedures for handling the product.

Connecting to the Printer

Connect the USB cable of the customer display to the USB connector on the printer.
Supported printers are listed below. See the following link for more details.
U"Supported Printers" on page 50
TM-m30
TM-m30II
TM-m30II-H
TM-m30II-NT
TM-m30II-S
TM-m50
TM-T88VI
TM-T88VI-iHUB
TM-T88VI-DT2
TM-T70II-DT2
• Make sure to turn the printer off and then connect this product.
• The product cannot be connected to the USB-A Device Charging (iPad2.1A) connector that is
mounted on TM-m30II-H or other printers.
• If you want to extend the USB cable, use the optional USB extension cable (OT-UL30).
• The optional kit, EXTENSION POLE UNIT FOR DM-D70 (DP-70), includes a USB extension cable.
• You can mount this product to TM-m30II-S as a rear display. Refer to TM-m30II-S User's Manual
for more details.
www.epson-biz.com/?prd=tm-m30ii-s&inf=users_manual
U
Chapter 2 Handling
11