Troubleshooting; Nothing Is Displayed On The Screen; The Screen Looks Dark When The Display Is Attached In Portrait Orientation - Epson DM-D70 Technical Reference Manual

Troubleshooting

Nothing is Displayed on the Screen

• Check that the USB cable is properly connected to the printer or to the computer.
U"Connecting to the Printer" on page 11
U"Connecting to the Computer" on page 13
• Adjust the brightness of the LCD screen by pressing the brightness up/down buttons.
U"Adjusting the Display Brightness" on page 15

The Screen Looks Dark when the Display is Attached in Portrait Orientation

When the display is attached in portrait orientation, the screen may look dark when viewed from the right or
the left, and may look differently when viewed from the opposite side. This is caused by gray scale inversion
phenomenon. If that happens, adjust the angle of the display.
However, if you cannot adjust the angle, for example, when you have fixed the display to a VESA mount, follow
the procedure below to make the screen appear brighter.
1
Remove the display and reattach it to the mount upside down.
2
Check that the screen is bright enough when viewed from an angle actually used.
At this step, the screen displays upside down.
3
Download one of the following utilities from the website.
For customers in North America U www.epson.com/support/
For customers in other countries U www.epson-biz.com/
• DM-D70 Utility (For Windows)
• TM Utility (For Android/iOS)
Chapter 2 Handling
17