Download Print this page

Care, Cleaning & Storage - Breville the Bakery Chef Hub LEM750 Instruction Book

Advertisement

Care, Cleaning
& Storage
Before cleaning, ensure that the speed control
dial is in the OFF (0) position, the power is
switched off and power cord is removed from
the power outlet.
Ensure the mixing bowl, splash guard, mixing
accessories and attachments (if used) have all
been removed from the mixer body.
MIXER BODY
1. Wipe clean with a soft, damp cloth then dry
thoroughly. Wipe any excess food particles
from the power cord.
2. Do not allow any water or other liquids to
enter the gear system as this may cause
damage.
WARNING
Never immerse the mixer, power cord or power
plug in water or any other liquids.
3. Avoid using any abrasive scouring pads
or cleaners when cleaning any part of the
mixer as these may cause damage to the
surface of these parts.
MIXING BOWL
1. Wash the bowl with warm, soapy water
using a soft cloth or soft bristle brush. Rinse
and dry thoroughly.
2. The mixing bowl can be washed in the
dishwasher on a standard wash cycle.
3. Do not soak the mixing bowl in water
for extended periods of time as this may
damage the metal finish.
18
LEM750_ANZ_IB_A20.indd 18
MIXING ACCESSORIES AND
SPLASH GUARD
1. Wash the accessory used and splash guard
with warm soapy water using a soft cloth or
soft bristle brush. Rinse and dry thoroughly.
2. Do not place any of the accessories or the
splash guard into the dishwasher. The heat
may cause damage to these parts.
HUB ATTACHMENTS
As each attachment hub attachment is
different, refer to the specific hub attachment
instruction booklet for care, cleaning and
storage details.
STORAGE
1. Store your mixer on the kitchen bench or
standing upright in an accessible cupboard.
2. Always ensure that the speed control dial
is in the OFF (0) position and the mixer
is unplugged from a power outlet when
storing.
3. Using the cord storage feature, push
the power cord into the cord storage
compartment until just the Breville assist
plug is showing.
4. Store the mixing bowl in the locked position
in the bowl recess with all accessories inside
the bowl and with the mixer motor head
locked in the horizontal position. Store
any hub attachments in their original box
when not in use. Always remove any hub
attachment from the mixer after use.
5/8/20 12:37 pm

Hide quick links:

Advertisement

loading