Care, Cleaning & Storage - Breville Scraper Pro BEM800XL/B Instruction Book

CARE, CLEAnInG
& StoRAGE
of your Breville product
CARE, CLEAnInG & StoRAGE
CLEAnInG AftER USE
1. Ensure the Speed Control Dial is in
the OFF position and the power cord
is unplugged.
2. If the pouring shield is assembled,
detach the pour spout then slide the
main ring from the mixing bowl.
3. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to raise the mixer head until it
locks into the open position.
4. Remove the attachment from the
Attachment Shaft then remove the
mixing bowl from the Bowl Locking
Recess (see page 13, 14 and 15 for
detailed instructions).
5. Wash the mixing bowl, pouring shield,
spatula, scraper beater, flat beater,
wire whip and dough hook in warm
soapy water with a soft cloth. Rinse
and dry thoroughly. Alternatively, the
mixing bowl, pouring shield, spatula
and attachments may be washed in the
dishwasher (spatula and attachments,
top shelf only).
notE
Do not use abrasive scouring pads or
commercial cleaners when cleaning
the mixing bowl, pouring shield,
spatula, scraper beater, flat beater,
wire whip or dough hook as these may
scratch the surface. Also ensure that
the attachments are not soaked in
water for extended periods of time, for
example several hours or overnight, as
this may damage their finish.
6. Wipe the mixer head, Attachment Shaft
and mixer base with a soft, damp cloth
then dry thoroughly. Wipe any excess
food particles from the power cord.
notE
Do not wash or immerse the mixer
head and mixer base in water or any
other liquid. Clean with a soft, damp
cloth and dry thoroughly. Do not allow
water or any liquid to enter the gear
system as damage may result.
StoRAGE
1. The Mixer should be kept in a
convenient position on your kitchen
counter top or in an accessible cupboard.
2. Ensure the power cord is unplugged
and the Speed Control Dial is in the
OFF position.
3. Insert the mixing bowl into the Bowl
Locking Recess and securely lock
into place.
4. Place the attachments inside the
mixing bowl.
5. Press the Tilt-Release button and
simultaneously use the Lift Assist
Handle to lower the mixer head until it
locks into the closed position.
6. Slide the main ring of the pouring shield
into position on top of the mixing bowl
then attach the pour spout.
7. The mixer head cannot be taken off the
mixer base for any purpose.
23