Advertisement
4. To lower the mixer motor head, hold the
front of the mixer head with one hand
to assist with lowering, and press the tilt
release button with the other. Lower the
mixer motor head back to the horizontal
position until it locks in place.
ATTACHING AND REMOVING
THE MIXING BOWL
1. Ensure the motor head is tilted upwards into
a diagonal position and locked into place
before attaching or removing the mixer
bowl. The mixing bowl should be in place
before attaching any mixing accessories.
2. With the motor head tilted upwards and
holding the mixing bowl by the handle,
insert the base of the bowl into the bowl
locking recess by aligning the notches on
the bowl and the grooves on the mixer base.
Turn the bowl in a clockwise direction,
following the
the base of the mixer, to securely lock the
bowl in place.
3. To remove the bowl, with the motor head
tilted upwards and holding the mixing
bowl by the handle, turn the bowl in an
anti-clockwise direction, turning against the
line until the bowl notches
align with the grooves on the mixer base.
Lift the bowl from the mixer.
12
LEM750_ANZ_IB_A20.indd 12
ATTACHING AND REMOVING THE
MIXING ACCESSORIES
1. Ensure the motor head is titled into a
diagonal position and locked into place
and the bowl is secured in place before
attaching or removing any mixing
accessories.
2. Align the groove in the top of the selected
accessory with the notch found on the
line found on
mixer spindle.
3. Push the accessory upwards onto the
spindle and rotate the accessory anti-
clockwise to secure. Pull the accessory
downwards to lock into position.
4. To remove, push upwards on the accessory
towards the motor head and turn clockwise
on the spindle until the groove and notch
are aligned.
5. Pull downwards on the accessory to release
from the motor spindle.
5/8/20 12:37 pm
Hide quick links:
Advertisement
