Switching On The Battery Inverter - Kostal PLENTICORE BI Operating Manual

Operation and operating the device
1 2 3

4.1 Switching on the battery inverter

Activate supply voltage via the line circuit breaker.
1.
Switching on the battery storage via battery switch.
2.
The battery storage starts up.
P
Switch the DC switch on the battery inverter to
3.
ON. Fig. 9
The battery inverter starts up.
P
During start-up, the LEDs in the control panel of the
P
battery inverter light up briefly.
The screensaver appears on the display and displays
P
the device type. The screensaver is deactivated
when a key is pressed twice.
The battery inverter is in operation.
H
© 2020 KOSTAL Solar Electric GmbH
4 4 5 6 7 8 9 10 11
INFO
For more information about operation,
refer to the operating manual for the
battery storage system.
INFO
If no key is pressed for several
minutes, the screensaver with the
image of the battery inverter appears
automatically on the display.
12
65