Switching On The Inverter - Kostal PLENTICORE plus Operating Manual

Operation and operating the device
1 2 3

4.1 Switching on the inverter

Activate supply voltage via the line circuit breaker.
1.
If present, switch on battery storage using battery
2.
switch.
The battery storage starts up.
P
Move DC switch on inverter to ON position.
3.
Fig. 10
If external DC voltage separators are present, activate
the DC strings consecutively.
The inverter starts up.
P
During start-up, the LEDs in the control panel of the
P
inverter light up briefly.
The screensaver appears on the display and displays
P
the device type. The screensaver is deactivated
when a key is pressed twice.
The inverter is in operation.
H
© 2018 KOSTAL Solar Electric GmbH
4 4 5 6 7 8 9 10 11
INFO
When no key has been pressed for
several minutes, the screensaver with
the image of the inverter appears
automatically on the display.
12 13
77