Advertisement

Cautions
Precautions and maintenance
● For indoor use only
To avoid risk of fire or electric shock, do not expose the unit to moisture or
condensation.
● To avoid overheating, do not block the ventilation holes on the back of the Digital
Photo Frame.
● Keep the Digital Photo Frame out of direct sunlight.
● Do not dismantle the Digital Photo Frame. There is a risk of electric shock and there
are no user-serviceable parts inside. Dismantling the Digital Photo Frame will void
your warranty.
Cleaning the LCD Screen
● Treat the screen carefully. Because the screen of the Digital Photo Frame is made of
glass and it would easily be broken or scratched.
● If fingerprints or dust accumulate on the LCD screen, we recommend using a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
● Moisten the cleaning cloth with the cleaning solution and apply the cloth to the
screen.
Please power off the unit before inserting or removing a card or USB
device.
Failure to do so may cause damage to the card/USB and the unit.
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This device is designed for privat use only!
WARNING:
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pictureline PL 4200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rollei Pictureline PL 4200

  • Page 1 Cautions Precautions and maintenance ● For indoor use only ● To avoid risk of fire or electric shock, do not expose the unit to moisture or condensation. ● To avoid overheating, do not block the ventilation holes on the back of the Digital Photo Frame.
  • Page 2 Introduction: Thank you for your purchase of the Digital Photo Frame. It is designed to allow quick and easy view of photos taken from your digital camera, mobile phone, or from a memory storage card. Please read this User Manual carefully to learn the correct way to use the Digital Photo Frame.
  • Page 3: Table Of Contents

    CONTENTS 1. Product Diagram ························································································ 4 1.1 Remote Control ························································································ 4 1.2 Rear of Frame·························································································· 5 1.3 Right Side of Frame ·················································································· 5 2. Installing & Replacing the Battery··································································· 5 3. Getting Started··························································································· 5 4. Operating Instruction ··················································································· 6 4.1. Card and USB ························································································· 6 5.
  • Page 4: Product Diagram

    1. Product Diagram 1.1 Remote Control 1) POWER ─ Switch On/Off. 2) MUTE ─ Press Mute button to silence the voice temporarily. 3) COPY&DEL ─Enter copy & delete interface 4) RETURN ─ Return to upper page 5) ─ Functional selection button from right to left cursor 6) ...
  • Page 5: Rear Of Frame

    1.2 Rear of Frame 1. Power on/off 2. PREVIOUS/UP 3. Play/Pause/OK 4. Right 5. Left 6. NEXT/DOWN 7. Menu/Exit 1.3 Right Side of Frame 1. SD/SDHC/MMC/MS CARD 2. EARPHONE JACK 3. USB 4. DC IN 2. Installing & Replacing the Battery If you need a new battery, please refer to the following.
  • Page 6: Operating Instruction

    the remote control has a battery inside. Please refer to “Installing & Replacing Battery” if you need a new battery. 3.4. Power on the unit by pressing the Power button on the remote control. 4. Operating Instruction When the frame is switched on for the very first time, a menu for the selection of the default language appears.
  • Page 7: Picture Mode

    It supports SD/SDHC/MMC/MS and USB 2.0. After inserting a card or USB device, slideshow will play automatically, then press RETURN twice to access to main menu. Note: Make sure there are supported files in the Card or USB device. 5. Picture Mode In main menu, highlight Photo, press OK to start slideshow.
  • Page 8: Copy & Delete Function

    5.1.Copy & Delete function Copy pictures to built-in memory : in thumbnail mode of Card/USB, use to highlight the picture you want to copy to built-in memory, press COPY DEL to enter Copy/Delete interface, use to select Copy to internal, press OK to confirm.
  • Page 9: Video Mode

    7. Video Mode Press RETURN to choose memory card in the main menu. Highlight Video, press OK to access the video mode, or press VIDEO directly on the remote control, press to select the video from the playlist, then press OK to confirm. Press VOL+/- to turn up/ down the volume.
  • Page 10: Setup

    Copy/Delete Function In file interface, use to select the file you want to Copy or Delete, press COPY DEL to enter Copy/Delete interface, use to select Copy to internal or Delete files, press OK to confirm. 10. Setup Select Setup from main menu, press OK to access to Setup interface.
  • Page 11: Stand Instruction

    Hour, Min, press OK to confirm 10.2.6 Alarm Tone: press to choose Alarm 1 2 or 3 10.2.7 Alarm Frequency: Once, Everyday, Mon. to Fri., Weekend 10.3 Video Setup 10.3.1 Display Mode: Full screen, Original Size 10.3.2 Play Mode: Circular, Single,Random 10.4 Music Setup 10.4.1 Play Mode: Single, Single repeat, Circular, Random 10.5 System Setup...
  • Page 12: Technical Specifications

    12. Technical Specifications  Adapter: Input: AC 100-240V 50/60HZ 350mA Output: DC 5V/1.5A  Picture Format: JPEG ,BMP  Video Format: MPEG1,MPEG2, MPEG4(Divx4.0,Divx5.0, Xvid) AVI, M-JPEG and MOV  Memory card: SD/SDHC/ MMC/MS.  USB connection: USB 2.0 & Mini USB ...

Table of Contents