Advertisement

Quick Links

Cautions
Precautions and maintenance
● For indoor use only.
● To avoid risk of fire or electric shock, do not expose the unit to moisture or
condensation.
● To avoid overheating, do not block the ventilation holes on the back of the
Digital Photo Frame.
● Keep the Digital Photo Frame out of direct sunlight.
● Do not dismantle the Digital Photo Frame. There is a risk of electric shock
and there are no user-serviceable parts inside. Dismantling the Digital
Photo Frame will void your warranty.
Cleaning the LCD Screen
● Treat the screen carefully, because the screen of the Digital Photo Frame is
made of glass and it would easily be broken or scratched.
● If fingerprints or dust accumulate on the LCD screen, we recommend using
a soft, non-abrasive cloth such as a camera lens cloth to clean the LCD
screen.
● Moisten the cleaning cloth with the cleaning solution and apply the cloth to
the screen.
Please power off the unit before inserting or removing a card or USB
device.
Failure to do so may cause damage to the card/USB and the unit.
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
WARNING:
1

Advertisement

Table of Contents
loading

Summary of Contents for Rollei Pictureline PL 6150

  • Page 1 Cautions Precautions and maintenance ● For indoor use only. ● To avoid risk of fire or electric shock, do not expose the unit to moisture or condensation. ● To avoid overheating, do not block the ventilation holes on the back of the Digital Photo Frame.
  • Page 2 Introduction: Thank you for your purchase of the Digital Photo Frame. It is designed to allow quick and easy view of photos taken from your digital camera, mobile phone, or from a memory storage card. Please read this User Manual carefully to learn the correct way to use the Digital Photo Frame.
  • Page 3: Table Of Contents

    CONTENTS 1 Product Diagram ························································································· 4 1.1 Remote Control ························································································ 4 1.2 Rear of Frame ·························································································· 5 1.3 Left Side of Frame ····················································································· 5 2. Installing & Replacing the Battery ··································································· 5 3. Getting Started ··························································································· 6 4. Operating Instruction ··················································································· 6 4.1 Card and USB ··························································································...
  • Page 4: Product Diagram

    1 Product Diagram 1.1 Remote Control 1) BGM: In slideshow mode, press this button to add background music 2) POWER: Switch On/Off. 3) MENU: Enter copy & delete interface 4) : Functional selection button from right to left cursor 5) OK: Press to confirm. Play/pause: In the playing mode, press this button, it will pause;...
  • Page 5: Rear Of Frame

    Rear of Frame 1. Menu 2. Play / Pause / OK 3. Previous / Up 4. Next / Down 5. Left / Fast backward 6. Right / Fast Forward 7. Exit 1.3 Left Side of Frame 1. SD/SDHC/MMC/MS Card 2. Earphone Jack 3.
  • Page 6: Getting Started

    3. Getting Started 3.1 Plug one end of the included AC adapter into a standard 110-240V AC electrical outlet and the other end into the DC in of the frame. 3.2. Remove the protective film covering the LCD. 3.3. Remove the plastic battery insulator from the battery compartment and make sure the remote control has a battery inside.
  • Page 7: Card And Usb

    4.1. Card and USB Press RETURN 3 times, it will show the card select interface with built-in memory, USB and SD/SDHC/MMC/MS card. It supports SD/SDHC/MMC/MS and USB flash drives. After inserting a card or USB device, slideshow will play automatically, then press RETURN twice to access to...
  • Page 8: Copy & Delete Function

    Press SLIDESHOW to start slideshow pictures in the selected slide mode. Change slide mode as follows: Press MENU to choose SLIDE MODE, select with (single window/two windows / four windows / triple windows), press OK to confirm. 5.1. Copy & Delete function Copy pictures to built-in memory: In thumbnail mode, use select the picture you want to copy to...
  • Page 9: Music Mode

    6. Music Mode Press RETURN to choose "MEMORY CARD" in the main menu. Choose Music, press OK to enter the music interface, press to select the music from the playlist, then press OK to confirm. Press VOL+/- to turn up/ down the volume.
  • Page 10: File

    to select the video you want to copy to the built-in memory or delete, then press MENU to enter copy/delete interface, press OK to confirm. 8. File Select File, then press OK to access to file interface. In this mode, you can browse all the picture files and folders in the memory card or the built-in memory.
  • Page 11: Calendar

    9. Calendar Select Calendar from the main menu, press OK to enter, the calendar is displayed and any photos on the connected memory are shown as a slideshow to the side. Browse the calendar by using 10. Setup Select Setup from the main menu, and then press OK to access to Setup interface.
  • Page 12: Stand Instruction

    to select, then press “Save Time” to save the setting. 10.13 Set Time Format: 12/24, Press to set, use OK to confirm 10.14 Alarm: Press OK, choose setup items with as follows: Status, Number, Hour, Minute, Mode, press OK, use to set, Press OK to confirm.
  • Page 13: Pc Connecting

    12. PC Connecting If the unit has built-in memory and MINI USB, you can connect it to external equipment by using USB cable: A. Please turn on the digital photo frame, then connect it with your computer by using USB cable B.
  • Page 14: Troubleshooting Guide

    14. Troubleshooting Guide If you are having problems with your player, please consult both this guide and manual. If you need further assistance, please contact Technical Support.  No power: Please check whether the plug is inserted correctly.  Remote control no function: Please check whether the battery has power (the battery can be used for half a year in normal conditions).

Table of Contents