Advertisement

Quick Links

Cautions
Precautions and maintenance
 For indoor use only
 To avoid risk of fire or electric shock, do not expose the unit to moisture or condensation.
 To avoid overheating, do not block the ventilation holes on the back of the Digital Photo
Frame.
 Keep the Digital Photo Frame out of direct sunlight.
 Always use the eject buttons on the memory storage card slots to remove the storage cards.
 Do not dismantle the Digital Photo Frame. There is a risk of electric shock and there are no
user-serviceable parts inside. Dismantling the Digital Photo Frame will void your warranty.
Cleaning the LCD Screen
 Treat the screen carefully. Because the screen of the Digital Photo Frame is made of glass and
it would easily be broken or scratched.
 If fingerprints or dust accumulate on the LCD screen, we recommend using a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
 Moisten the cleaning cloth with the cleaning solution and apply the cloth to the screen.
Please power off the unit before inserting or removing a card or USB
device.
Failure to do so may cause damage to the card/USB and the unit.
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture.
WARNING:
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pissarro DPF 70 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rollei Pissarro DPF 70

  • Page 1 Cautions Precautions and maintenance  For indoor use only  To avoid risk of fire or electric shock, do not expose the unit to moisture or condensation.  To avoid overheating, do not block the ventilation holes on the back of the Digital Photo Frame.
  • Page 2 Introduction: Thank you for your purchase of the Digital Photo Frame. It is designed to allow quick and easy view of photos taken from your digital camera, mobile phone, or from a memory storage card. Please read this User Manual carefully to learn the correct way to use the Digital Photo Frame. Features: 1.
  • Page 3: Table Of Contents

    CONTENTS 1. Product Diagram ·························································································································· 4 1.1 Remote Control ··················································································································· 4 1.2 Left Side of Frame ··············································································································· 5 1.3 Rear of Frame ······················································································································ 5 2. Installing & Replacing the Battery ································································································ 5 3. Getting Started ····························································································································· 5 4. Operating Instruction ··················································································································· 6 4.1 Card and USB ·······················································································································...
  • Page 4: Product Diagram

    1. Product Diagram 1.1 Remote Control 1. POWER ─ Switch On/Off 2. SETUP ─ Enter copy & delete interface. 3. ROTATE ─ In the pause status of single picture, press to revolve the picture 90° in counterclockwise each time. ─ Functional selection button from the bottom to the top cursor. 5.
  • Page 5: Left Side Of Frame

    1.2 Left Side of Frame 1. SD/SDHC/MMC CARD 2. USB PORT 3. DC IN 1.3 Rear of Frame 1. Power on/off 2. UP 3.Play/Pause/OK 4.Left 5. Right 6. Down 7. Menu/Exit 2. Installing & Replacing the Battery If you need a new battery. Please refer to the following. Place the upside of the remote control down, press down on the ridged area of the battery cover and pull towards you to remove the tray.
  • Page 6: Operating Instruction

    4. Operating Instruction When the frame is switched on for the very first time, a menu for the selection of the default language appears. Please select the desired language and confirm with the OK Button. To open the Language-Selection again, please use the Reset Function in the Menu Set UP.
  • Page 7: Copy & Delete Function

    Press SLIDESHOW to start slideshow pictures in the selected slide mode. 4.3 Copy & Delete function Copy pictures to built-in memory: In the pause state of single picture, long press SETUP to enter copy interface, press OK to copy the picture to built-in memory.
  • Page 8: Calendar

    to select the picture you want to delete. Press SETUP to enter the delete interface, press OK to confirm. 6. Calendar Select Calendar from the main menu, press OK to enter, the calendar is displayed and any photos on the connected memory are shown as a slideshow to the side.
  • Page 9: Technical Specifications

    9. Technical Specifications  Adapter: Input: AC 100-240V 50/60HZ 350mA Output: DC 5V/1A  Picture Format: JPEG  Memory Cards: SD/SDHC/ MMC  USB connection: USB 2.0  Screen Parameter: Screen Size: 7 inch TFT Resolution: 800* 480 Contrast: 300:1 Aspect Ratio: 16:9 Brightness: 250-300 cd/m Response Time: 20ms...

Table of Contents