Related Manuals for E-Collar Technologies FT-330 Series
Summary of Contents for E-Collar Technologies FT-330 Series
- Page 1 E-Collar Technologies Incorporated Finger Remote FT-330 (FT-330TX, RX-090, FT-030) FT-332 (FT-332TX, RX-090, RX-090, FT-030)
- Page 2 Welcome to the World of E-Collar Technologies Incorporated FT-330 Series E-Collar FT-330 or FT-332 E-Collar Technologies Incorporated...
-
Page 3: Table Of Contents
..........- Important Notice ........... - Characteristics . -
Page 4: Important Notice
This product is intended to be used on DOGS ONLY. E-Collar Technologies Incorporated is not responsible for any misuse of this Product including damages from dog bites and lost items. Seek an evaluation by professional trainer before use on aggressive dogs. -
Page 5: Characteristics
continuous stimulation at the conditioning level as long as button is pressed (up to 10 seconds), leads to “Pavlovian Conditioning” whereby the dog responds to the tone. (FT-330) (FT-332) Remote Finger Button (FT-030) supported FT-330/332 Owner’s Manual... -
Page 6: Package Contents
• Transmitter Collar Receiver with Strap (FT-332 Package includes 2 Receivers and straps) • Finger Trainer (FT-332 FT-330/332 Owner’s Manual... -
Page 7: Device Operation
FT-330/332 Owner’s Manual... -
Page 8: Charging The Batteries
IMPORTANT BATTERY CARE INFORMATION : FT-330/332 Owner’s Manual... -
Page 9: Turning Your E-Collar On/Off
FT-330/332 Owner’s Manual... -
Page 10: Correctly Fitting Collar
FT-330/332 Owner’s Manual... -
Page 11: The Lcd Display Description
Blinking “1D” indicates the stimulation is unlocked and ready for adjustment. FT-330/332 Owner’s Manual... -
Page 12: Button Functions
stimulation at the conditioning level for as long as the button is pressed (up to 10 seconds). Release before 1.2 seconds for tone only. - The default value of the boosted lovel is 5 and it can be adjusted to any value between 1 and 60. - Page 13 Pressing and releasing “L” button will change the night tracking light mode. Pressing and holding Light (L) button will power off the transmitter. FT-330/332 Owner’s Manual...
-
Page 14: How To Find The Proper Stimulation Level
FT-330/332 Owner’s Manual... -
Page 15: Lock/Unlock The Stimulation Level
to unlock the stimulation level. FT-330/332 Owner’s Manual... -
Page 16: How To Set The Boost
FT-330/332 Owner’s Manual... -
Page 17: Lost Transmitter Mode
Your FT-330/332 E-Collar transmitter allows the user to activate a 6 hour timer. After 6 hours, the transmitter will begin to beep providing the ability to locate the transmitter. The LCD displays “AL” during beeping. Lost transmitter mode is activated by simultaneously pressing the Light (L) button and the stimulation button (Black “S”) when the intensity level is set to zero. -
Page 18: Replace/Add Collar
FT-330/332 Owner’s Manual... -
Page 19: Ft-332 Lcd Description
FT-332 LCD DESCRIPTION FT-330/332 Owner’s Manual... -
Page 20: Ft-332 Button Functions
FT-332 BUTTON FUNCTIONS FT-330/332 Owner’s Manual... - Page 21 FT-332 BUTTON FUNCTIONS After 1.2 seconds of tone, the collar will send continuous stimulation at the conditioning level for as long as the button is pressed (up to 10 seconds). Release before 1.2 seconds for tone only. (PLEASE PRACTICE) FT-330/332 Owner’s Manual...
-
Page 22: How To Lock/Unlock The Stimulation Level
FT-330/332 Owner’s Manual... -
Page 23: Ft-332 Boost Level Setup
FT-332 BOOST LEVEL SETUP FT-330/332 Owner’s Manual... -
Page 24: Testing Your E-Collar
FT-330/332 Owner’s Manual... -
Page 25: Finger Trainer
FINGER TRAINER Finger Control Button LED Indicator Antenna Marking Velcro Band Ther is no power switch on Finger Trainer because it is always turned on. To minimize battery consumption, it will enter standby mode after 2 hours inactivity. If Finger Control Button is pressed during standby mode, it exits from standby mode. -
Page 26: Pairing Finger Trainer With Ft-330/332 Transmitter
PAIRING FINGER TRAINER WITH TRANSMITTER 1. Prepare Transmitter and Finger Trainer for pairing. Finger Trainer Transmitter 2. While holding down the control button on the Finger Trainer, turn on Transmitter Push Control Button Push Light Button to turn on Transmitter 3. - Page 27 PAIRING FINGER TRAINER WITH TRANSMITTER 4. Check for successful pairing (Collar Receiver is not to be on the Dog) (1) Turn Transmitter stimulation dial to any value other than "0". (2) Press the Finger Trainer control button and make sure the Transmitter is activating the collar receiver.
-
Page 28: Changing The Button The Finger Trainer Controls On The Ft-330/332 Transmitter
CHANGING THE BUTTON THE FINGER TRAINER CONTROLS ON THE TRANSMITTER The Finger Trainer can be set to control any one of the 3 Buttons of the Transmitter, S1(Black) S2(Red) and T Button. - How to set the Finger Trainer to control different Transmitter buttons. Simply push the desired Transmitter Button simultaneously with the M/C button. -
Page 29: Operating Distance And Battery Of Finger Trainer
OPERATING DISTANCE AND BATTERY OF FINGER TRAINER - Operating distance between Finger Trainer and Transmitter is maximum 12 feet. - CR2032 3 Volt Lithium Battery is used. - To replace battery, simply remove the 4 small screws on the back of the Finger Trainer. -
Page 30: Replacing The Contact Points
FT-330/332 Owner’s Manual... -
Page 31: Training Tips
Technologies Incorporated E-Collar Technologies Incorporated FT-330/332 Owner’s Manual... -
Page 32: Troubleshooting
FT-330/332 Owner’s Manual... -
Page 33: Two Year Warranty
FT-330/332 www.ecollar.com, click on the Product Registration link and fill out the The FT-330/332 Finger Remote Educator you have is our most recent design, it is different from the previous ET-300/302 Mini Educator, so please let us know that you have the new FT-330/332 Finger Remote Educator design when communicating with us. -
Page 34: Accessories
FT-330/332 Owner’s Manual... - Page 35 FT-330/332 Owner’s Manual...
-
Page 36: Safety And General Information
FT-330/332 Any change or modification made to the transmitter, including the supplied antenna, without the expressed written approval of E-Collar Technologies Incorporated could void your authority to operate. FT-330/332 Owner’s Manual... - Page 37 FT-330/332 Owner’s Manual...
- Page 38 FT-330/332 Owner’s Manual...
- Page 39 E-Collar Technologies Incorporated Copyright 2019 E-Collar Technologies Incorporated...
Need help?
Do you have a question about the FT-330 Series and is the answer not in the manual?
Questions and answers
Can you change intensity levels of tapping - vibration? If so, how?
My dog is not responding to any stimulation. I have gone up to 24. The collar is tight - I kept making it shorter until there was less than a finger underneath. I have the shortest prongs. The tester shows it is working. I tried it on myself and it is working. I imagine she would be more sensitive than the average dog - given how quickly she reacts to insects. She is a short haired lab/hound mix. She is a rescue and I am beginning to wonder if she was put on an e-collar before and was just following me around to obey. Any other ideas?