Sd-Card Messages - Observator Instruments Diff-Automatic User Manual

The header of the report can be customized to the style of
the company. To change the header you should place a
picture called diffheader.jpg in the DIFFiner folder. The
header will now change into the picture called
diffheader.jpg. The folder DIFFiner can normally been
found in C:\Program Files\Observator\DIFFiner or on the
SD-card. It is recommended to keep the same resolution
as the default header (800 x 120) to avoid lay-out
changes.
.

7.5 SD-card messages

The error SD failure can occur if the SD-card is removed while the
storage menu is opened (which is strongly
DIFF will return to the main menu. If the message occurs when
the SD card is still present it may be possible that the SD card is
not inserted correctly. Please re-insert the SD-card.
SD failure
=======================
 Measurement
Storage
Calibration
Off
Settings
If the SD-card contains corrupt data (caused by removing the SD-
card) it will show the warning "corrupt data". The warning
disappears when you turn the selection button.
The rooms that are not corrupted can still be measured.
Put the SD-card back in the computer to restore the file system.
The SD-card will now automatically be restored when DIFFiner
starts.
Version: 12.6 EN
discouraged!). The
If the SD-card is removed during the writing of data an error "SD
300
failure 300" will occur. The number at the right will count down. It is
possible to reinsert the SD-card while the counter is still active. The
data will still be saved. Not reinserting the SD-card will result in data
loss.
Date: 22-09-2020
User Manual Diff
AT-DIFF
SD failure
=======================
 Measurement
Storage
Calibration
Off
Settings
Corrupt data
=======================
Page: 21 of 28