Diffiner; Installing Diffiner - Observator Instruments Diff-Automatic User Manual

7. DIFFiner

The software program DIFFiner is available with the DIFF. This program makes it possible to:

Store data on a SD-card and/or a PC

Creating measuring reports

Pre-configuring of measuring points.
This software package requires a pc with Windows XP, Vista, 7 or Windows 10 with a minimum resolution
of 1024X768.

7.1 Installing DIFFiner

Download DIFFiner in the software section of our website:
http://www.observatorair.com/
You can install DIFFiner with the standard settings.
Put the supplied SD-card in the card reader, after the installation.
Start DIFFiner and select the SD-card in the
selection menu.
- DIFFiner needs to run as administrator when using Windows 7 (Right click on the icon and
select run as administrator)
- When the SD-card is not found you should check if the SD-card is formatted as FAT32. Make
sure that the SD-card is always formatted as FAT32.
(My Computer  Right click on the SD-card  Format)
It is possible that the following message shows up when an external card reader (that can read multiple
types of flash cards) is used.
Click on Cancel and select the SD-card in the following window. DIFFiner will operate normally.
Version: 12.6 EN Date: 22-09-2020
User Manual Diff
AT-DIFF
Page: 16 of 28