Adding A Project - Observator Instruments Diff-Automatic User Manual

7.2 Adding a project

The first time a SD-card is used you will be
asked if the SD-card needs to be prepared
for use with DIFFiner. Click OK. The SD-
card will be prepared for DIFFiner and the
projects that are already on your hard disk
will also be copied to the SD-card.
DIFFiner will boot when the SD-card is
ready.
Click open to create a new project
The screen that opens will show the already
existing projects. Click new to create a new
project.
It is also possible to export projects to a DIFF
file. These files can be send
to engineers on location. The engineer
can import these files onto the DIFF.
Click on new to create a new project.
It is possible to create a database in the newly appeared screen. It is
possible to ad the following items to the database:

Fan setting (position of the HRS switch)

Type of room (e.g. Living room, bedroom)

Grill position (e.g. position 1, position 2, 2mm)

Grill type (e.g. STHXX)

Grill situations (e.g. Clean, unreachable)
The created items can be used in the section Building. You
can fill in as much as possible information of the building that
is going to be measured.
Version: 12.6 EN Date: 22-09-2020
User Manual Diff
AT-DIFF
Page: 17 of 28