Setting The Timer; Care And Maintenance - Seecode 20216 Operating Instructions Manual

SETTING THE TIMER

The heater has a built-in timer that starts the heater after a certain
time automatically switches off.
1. while the heater is connected and
switched on is, press the „Timer But-
ton", to activate the timer, as shown.
2. press the „Timer Button" to set
the number of hours before the
Heater switched off. You can choose
between 1-12 hours.
3. when you have selected the desired hours, stop
Press „Timer button" to set.
4. to deactivate the timer, switch off the heater or
press the „Timer Button" to 0.

CARE AND MAINTENANCE

WARNING: Accept the heater before starting maintenance
the handlebars from the socket, and let it cool down completely.
● To clean, wipe the outside with a dry cloth.
DO NOT use alcohol or petrol to clean the heater,
no scouring powders, no furniture polish and no rough brushes. Therefore
the housing of the heater may be damaged.
DO NOT immerse the heater in water.
CAUTION: DO NOT ALLOW LIQUID TO ENTER THE HEATER
● Store in a cool, dry place when not in use.
Note: If the heater stops working due to overheating
16