Seecode 20216 Operating Instructions Manual page 12

Table of Contents

Advertisement

Available languages

Available languages

risk.
This heater is not intended for use in bathrooms, laundry rooms and simi-
lar interiors. This heater is not intended for use in places where GFCI - FI
sockets can be used.
Never place the heater in a position where it can be or other water
containers can fall.
To disconnect the heater from the mains, set the mains switch to the
position O and only then pull the heater by the handle out of the socket.
Do not pull the optional cable when If you want to remove the plug from
the power source, always disconnect the on the plug itself.
Make sure that NO foreign bodies enter the ventilation or exhaust air
openings penetrate or block them, as this will lead to electric shock, fire or
damage to the heater can lead.
To prevent possible fire, the air inlets and outlets must not be are not co-
vered up in any way. Not on soft surfaces, such as a bed, where openings
could be blocked.
Leave at least 1m of free space, in order to achieve a maximum heat, air
and ventilation flow to make this possible.
A heater has hot and arcing or sparking parts inside. Do not use the hea-
ter in areas where petrol, paint or flammable liquids are used or stored
and do not use flammable cleaning agents to clean the heater Solvent.
Always keep the heater dry.
Use this heater only as described in this manual. described. Any other
use that is not described by the manufacturer is recommended, fire,
electric shock or injury to people or even death.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

231656

Table of Contents