Seecode 20216 Operating Instructions Manual page 11

and reduce injuries to persons, including the following
• DO NOT connect other equipment to the same circuit. If you are not sure
whether your home meets this specification, please contac
Consult a certified electrician before use. In case of non-observance
there is a risk of fire, overheating, malfunction, Property damage, injury
or even death.
• DO NOT connect the heater to extension cables, surge protectors,timers,
direct breakers, etc. At Failure to observe this warning may result in fire,
overheating or malfunction, Material damage, injuries or even death!
• This heater is hot when it is in operation. To avoid burns avoid, hot surfa-
ces must NOT be touched with bare skin will be. Never move the heater
during operation.
• Keep flammable materials such as furniture, pillows, bedding, papers
clothing, curtains etc. at least 1.0 meter from the front, the removed from
the sides and the back of the heater.
• The heater should not be used by children, the elderly and people with
reduced physical, mental or sensory abilities be used or maintained. The
heater must not be left unattended is operated.
• Always remove the cooled heater by the handles the socket when it is
not in use.
• DO NOT operate a heater in a damaged socket or after the heater does
not work, has fallen down or is in was damaged in any way. The heater is
then properly to be disposed of or sent to an authorized service center for
inspection and/or repair to the customer service centre.
• DO NOT use outdoors. If the heater is used outdoors elements exposed
to rain, snow, sun, wind or extreme temperatures it can become a security