SAVE THESE OPERATING INSTRUCTIONS:
1. insert the heater plug into the
desired socket. Use the „Plug -
Rotation" for the most convenient placement on the wall.
2. press the power switch on the side of the heater
to position I to switch on the heater,
the device is in standby mode.
3. press the „On/Off" button, the heater
begins to heat up.
4.Select the desired temperature. Use the button
„
„ increase the temperature and with the „ „ button
lower the temperature between 15°- 45° on the
„Digital readout." If the room temperature exceeds the
set temperature is reached, the digit on the display
flashes
14