Seecode 20216 Operating Instructions Manual page 15

The plug can be rotated 90° and fits into any socket
1. hold „Connector Rotation Button" pressed
2. turn the prongs with of the hand
carefully into thedesired position,
such as showed.
3. leave the „Connector Rotation
Button" on go and lock it up.
5. press the „On/Off" button again, the heater
stops heating, but the fan still works 60
for seconds. After the fan has not
the heater goes into standby mode.
Condition over.
6. when the fan is switched off, press the
Set the power switch on the side to position O and pull
the heater from the socket by the handles,
store it in a cool dry room until
next use.