Advertisement
4-2 Output connection
To Connect the power supply unit
1. Connect the DC+12V to the red line.
2. Connect GND to the black line.
To Connect the Door lock device
1. Connect the plus(+) line of the lock device to DC+12V.
2. Connect the Minus(-) line of the lock device to the white line.
To connect the alarm device
1. Connect plus(+) line of the alarm device to DC+12V.
2. Connect the minus(-) line of the alarm device to the purple line.
To specify the lock type
1. POWER FAIL SAFE : Connect the yellow line to GND.
2. POWER FAIL SECURE : Leave the yellow line in the floating state.
Quick Installation Guide
6
Advertisement
