Lighting; Canopies; Lighting Bases - VEDUM Wine shelf Instruction Manual

4. Lighting

4.1 CANOPIES

LIGHT FITTINGS
For lighting under wall cabinets, it is appropriate to have an electric conduit coming out under the bottom edge of the wall cabinet. If you have LED lights,
place the driver in a suitable place, such as inside or above a cabinet. NB: The cabinets are not set up for cable laying, which means that any recesses for
cables and cable strips will need to be made on site in the bottom, shelves and top. Plan electrical outlets for lighting in advance on your kitchen drawing
together with an electrician. Many of our wall cabinets at heights of 700, 850 and 988 mm can be ordered with a groove for cable laying (against a
surcharge) on the outside, which are then hidden by adjacent cabinets or by a decorative side.
Pre-drill CANOPIES and screw into the top of the wall
cabinet. Fit spotlights and connect the electric cables
between the driver and the spotlights on the top of
the canopies.

4.2 LIGHTING BASES

Corner diagonal
End
Lighting bases for positioning under wall cabinets are available in five varieties:
Art. no. 3567 Straight 1600x322x16
Art. no. 3568 Straight 2500x322x16
Art. no. 3565 Corner diagonal 599x599x16
Art. no. 3566 End 322x322x16
Art. no. 3569 Corner module 460x393x16
When installing a lighting base with screws from inside the frame, the screw heads can be covered with cover plugs, white 20 mm, with art. no. 39226.
32
FITTING A CANOPY BETWEEN TWO WALL CABINETS. Use the
supplied jointing plates (4 pcs) art. no. 39332 and screws (8 pcs) art.
no. 39147. Pass the canopy between the wall cabinets and fasten to
the top with jointing plates and screws. Fit spotlights and connect
the electric cables between the driver and the spotlights on the top
of the canopies. If decorative sides are used, these should be cut
corresponding to the thickness of the canopy, and the canopy should
be installed on top of the decorative sides.
Art. no. 3563 Straight 1238x323x19
Art. no. 3564 Straight 2457x323x19
Art. no. 3562 Corner diagonal 599x599x19
Art. no. 3561 End 323x323x19
Art. no. 3570 Corner module 460x394x19
Straight
Corner module