Table of Contents
Advertisement
Interfaces
SIM/USIM Slot
RESET
GND
2.3. CPE Software
The firmware of the CPE should be BaiCE_BG_1.5.4 or above, if the CPE is not running this version, please
download it from the Baicells website > Resources >
2.4. Login
The CPE comes preloaded with a GUI to configure the device. With the CPE turned on and connected to the
router, access the GUI login page by opening a Web browser and entering
Figure 2: Login
2.5. Status Menu
2.5.1.
After logging in, the GUI opens to the Status > Overview page (错误!未找到引用源。). This page is a
dashboard of key information regarding the CPE. The top row, Current State, shows the network connection
status, signal intensity, LAN link status, and the number of smart devices (cell phones, pc's, laptops)
connected to the Internet through the CPE.
Description
Universal Subscriber Identity Module card slot, 1.8V/3.0V USIM 2FF
Reset/restore button
Ground lug. The unit is connected to Earth by conductor.
Initially, use the default Username = admin/Password = admin (Figure 21).
Once you are in the GUI, you will want to change the password; please refer
to
section 3.9.1
Account.
Overview
Firmware
or contact Baicells support.
http://192.168.150.1
9
.
Advertisement
Table of Contents
