Table of Contents
Advertisement
2.7. LTE Menu
2.7.1.
Connection Settings
LTE connection settings includes Roaming settings, Default connection settings and Power Scan Option.
Figure 19: Connection Settings
2.7.1.1. Roaming setting
If set Roam enable, the CPE can access to other PLMN network, else the CPE just can access the network
PLMN same with the SIM card.
2.7.1.2. Default connection
If set always on, the CPE will automatic access the LTE network after booting, if set manual, the CPE need
manual connection to the LTE network.
Figure 20: Default Connection Settings
2.7.1.3. Power Scan Option
The CPE support two power scan options, the first is First Detected Cell, and the second is the Strongest
Cell.
18
Advertisement
Table of Contents
