Table of Contents
Advertisement
Figure 21: Scan mode Settings
2.7.2.
Edit APN Profile
An Access Point Name (APN) is the name of a gateway between a 3G/4G mobile network and another
computer network, frequently the public Internet. Generally, multiple APNs are used for different business
flows such as TR-069 management, voice, data, etc., and may support different services and QoS levels for
different subscribers.
Figure 22: APN Profiles
The CPE supports 8 APN configurations. At least one APN (TR-069) must be configured when the CPE/eNB
connect to the Baicells CloudCore. In the window (Figure 42) you will select the APN number (1-8), enable it,
enter an APN Name, select the type of IP addressing (IPv4, IPv6, or IPv4v6), identify if it is the default
gateway, and choose which type of protocol will be supported on it.
2.7.3.
PIN Management
Use the PIN Management feature if you want to require users to enter a PIN code before they can use the
CPE to access the network (Figure 43). Once the PIN is enabled, you will need to remember it if you want to
later modify the number. You are limited to 3 tries to enter the correct PIN code before getting locked out.
If this happens, contact your service provider (end-users) or Baicells support (service providers).
19
Advertisement
Table of Contents
