Table of Contents
Advertisement
Figure 40: Port Triggering Settings
2.9.3.
ALG
The Application Layer Gateway (ALG) function provides a security component that augments a firewall or
the NAT used by the CPE (if WAN Network Mode = NAT). It allows customized NAT traversal filters to be
plugged into the gateway to support address and port translation for certain application layer control/data
protocols such as SIP, TFTP, PPTP, L2TP and IPSeC. You can enable the different types of application
protocols by clicking on the check box next to the protocol name (Figure 61).
Figure 41: Throughput Statistics
2.10.
System Menu
2.10.1. Account
This menu is used to change the login password for the CPE (Figure 62). The password must be 5 to 12
characters. Baicells recommends using a combination of upper- and lower-case letters and numbers.
Figure 42: Account
29
Advertisement
Table of Contents
