Table of Contents
Advertisement
2.10.2. WEB Settings
WEB Setting provides the ability to configure and manage the CPE remotely (Figure 63). This is especially
helpful when a user calls in for technical assistance. In
the default URL of
http://192.168.150.1.
Figure 43: WEB Settings
2.10.3. NTP
The operator's network may may use up to 4 Network Time Protocol (NTP) servers to provide correct
time-of-day to network devices. In the CPE GUI you can refresh the local time display using the SYNC WITH
BROWSER button; select the time zone that the CPE is in; and enable NTP client to use the default or
specified NTP servers for synchronization (Figure 64).
Figure 44: NTP Settings
2.10.4. TR-069
If your network operates using a TR-069 auto-configuration server (ACS), the ACS will automatically provide
the CPE configuration settings. Once you set up both the ACS and the CPE, you do not need to enter any
other parameters through the CPE GUI. Use the TR069 sub-menu to enable the TR-069 function for the CPE
(Figure 65). Refer to 错误!未找到引用源。 for a description of each field.
Figure 45: Throughput Statistics
section 3.3
Refer to 错误!未找到引用源。 for a description of each field.
30
Login, you used this Web application with
Advertisement
Table of Contents
