Table of Contents
Advertisement
When reinstalling with upgrading etc., use USB flash drive and do it in the same way as setup.
(Refer to "[6] Set up") Here we show how to enter the initialization screen.
Initialize settings
It also enters the "model set initialize function" screen as follows.
Please hold down the install button and turn on the power.
Reset the setting of the sewing machine you are using to
"Initialize" to the initial value.
Initial setting value in internal memory"
"
►It decide by
►A message will be displayed, so please operate according to
the message.
Note When returning to the standard screen without changing the
initial value
When you press the
right appears.
If you press
screen without initialize.
Note
To erase internal memory, please use format.
Refer to the technical document for operation panel page 15-3 "Format".
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
[11] Initialize settings
key
key, a message like the one on the
key, it is possible to move standard
11-1
Advertisement
Table of Contents
