Mitsubishi PLK-J-CU-20S Technical Manual page 14

1-1. Control box install
CPU system data install
(1) Please insert USB flash drive to CON W
connector on the operation panel.
(2) Please hold down the install button and turn on the power.
Press the install button until the red LED
on the front of the control panel lights up.
(3) It will start to install, please wait a while still complete installing.
The red LED on the front of the control panel will be displayed
during installation.
‡If the red LED is blinking, the installation has failed. Check the "PLKJ_SYSTEM" folder inside the USB flash
drive and try again.
(4) After the installation is completed, the "model set initialize
function" screen will be displayed.
If "SELECT", select model data from USB flash drive.
►Please select the model name by
And it is decided by press the
*Please correctly select the model to be used.
►Message is displayed.
Please turn off the power according to the message.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
+
key.
key.
6-2
CPU
System
data
Model
data
Install button
LED (red)