Mitsubishi PLK-J-CU-20S Technical Manual page 33

< sequel to INPUT SIGNAL >
Code
Machine head tilting detection
HES
signal
SP0 to SP9 Speed dial signal
SPU Speed up signal
SPD Speed down signal
CK1 Cassette jig sensor 1 signal
CK2 Cassette jig sensor 2 signal
BCDR Barcode reading input signal
Input signal of material
DFCR
Thickness detection clear
Input signal of abnormal stitch
SKCR
detection clear
Input signal of abnormal stitch
S2CR
detection 2 clear
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
Function
When HES input is on, message [M-038] is displayed.
Speed dial value is switched to 0 to 9.
Speed dial value is increased +1.
Speed dial value is decreased -1.
When CK1 and CK2 inputs is on, OF1 output turn on.
*CK1 and CK2 is effective when [Cassette jig function ON/OFF (CHK)] and
[Cassette jig sensor ON/OFF (CSN)] has been sets to ON.
When input BCDR is turned ON, the pattern can be read with a barcode.
This signal is effective when Program mode [Communication (UBCT)] is OFF.
Material thickness detection OK Output signal (DFOK), material thickness
detection NG output signal (DPNG, DNNG) are turned OFF.
Turn off abnormality stitch detection OK output signal (SKOK) and abnormality
stitch detection NG output signal (SKNG).
Turn off abnormality stitch detection 2 OK output signal (S2OK) and
abnormality stitch detection 2 NG output signal (S2NG).
Specifications
9-3