Software Update Procedure - Panasonic PT-EZ770Z Service Manual

SECTION 3 ADJUSTMENTS

2. Software Update Procedure

* The projector supports software updating methods below:
• Updating the software via LAN terminal: Main/Sub/Network software
• Updating the software via serial terminal: Main/Sub/DIGITAL LINK software
2. 1. Update by the LAN terminal
connection (Main/sub/net-
work software updating)
2. 1. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable : LAN cable. (When con-
necting directly, use a cross cable)
3. S ervice Software : [Main/Sub/Network/Format-
ter Update Tool.exe] Service software can be
downloaded from the projector service homep-
age.
4. Microprocessor software: Please download the
file from the projector service homepage to your
PC.
2. 1. 2. Connection Preparations
1. S et the "DIGITAL LINK MODE" of the NETWORK menu of projector to [AUTO] or [ETHERNET].
2. Confirm the network IP address of the projector and take a note.
3. Set the IP address of computer to the same IP address group of the projector.
Note:
Set up your computer not to turn in the standby or shutdown during the software updating.
2. 1. 3. Update procedure
1. Set the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software with a computer, select Model, and then click the [OK] button.
3. Select "LAN" in "Connection" and input the IP address of the projector, and click [Connection Check] button.
Computer
LAN cable (straight)
Hub
ADJ-11
Projector
LAN cable (straight)