Safety Notices - Emist TruElectrostatic EX-7000 Operation Manual

GENERAL
GENERAL
PRECAUTIONS & PRECAUTIONS & INSPECTION &
SAFETY WARNINGS SAFETY WARNINGS

SAFETY NOTICES

This manual contains information that is important for you to
know and understand before operating the EMist TruElectrostatic
Sprayer. This information relates to protecting your safety and
ensures product reliability and performance. It is the owner's
responsibility to ensure that all who operate this equipment
read this manual.
Warnings
Please read the manual carefully and pay special attention to the
symbols and warning labels. Warning labels indicate a potentially
hazardous situation which, if not avoided, could result in death or
serious injury.
WARNINGS
• Read and fully understand the EMist TruElectrostatic Sprayer
Operations Manual prior to using the electrostatic sprayer.
• EMist TruElectrostatic Sprayers should never be used in a
hazardous environment.
• EMist TruElectrostatic Sprayers should never be used in an
area containing volatile chemicals. Nor should it be used in any
area containing volatile or explosive levels of gas, vapor
or particulates.
• EMist TruElectrostatic Sprayers should never be used by
untrained personnel.
WARNINGS
PRESSURIZED EQUIPMENT HAZARD
Liquid from equipment that leaks or ruptures from a component
can splash in the eyes or on skin, causing serious injury. In order
help prevent a leak or rupture:
• Check equipment daily. Replace worn or
damaged parts immediately.
1
INITIAL ASSEMBLY &
OPERATION
SET UP INSTRUCTIONS
©2020 EMist ® is a registered trademark of SanoTech 360, LLC. All rights reserved.
EMist-00097-20 EX-7000 Ops Manual - 102620
SPRAY MAINTENANCE
APPLICATION & CLEANING
WARNINGS
PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them to fail,
which can lead to serious injury or property damage. In order to
help prevent against degradation:
• Use only water-based solvents to clean
equipment or parts.
WARNINGS
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in work area
can ignite or explode. To help prevent fire, explosion and electric
shock:
• Electrostatic equipment must be used
only by trained, qualified personnel who
understand the requirements of this manual.
• Stop operation immediately if static
sparking occurs or you feel shock. Do not
use equipment until you identify and correct
the problem.
• Use and clean equipment only in well
ventilated area.
• Never spray a flammable chemical
(with a flashpoint less than 60˚C).
• Do not turn lights on or off when
flammable fumes are present.
• Keep spray area free of debris, including
solvents, rags, gasoline or any flammable
chemicals.
• Keep a working fire extinguisher in the
work area.
• CAUTION, TO AVOID ELECTRICAL
SHOCK, DO NOT TOUCH OR
INSERT ANYTHING IN THE NOZZLE
OF THE SPRAYER
TROUBLESHOOTING,
SUPPORT
& REPAIR