GMW TG uni 1 Operating Manual page 23

Entering the appliance identification
Press the [Appliance testing] button in the Main menu (Fig. 16). A screen is
displayed requesting entry of the appliance identification. Pressing the [1/A]
button changes the display to a keypad (Fig. 17) allowing the entry of a test
object ID number with a maximum of 19 digits. This can also be read via a
barcode scanner.
Entry of the appliance identification number is not compulsory.
Fig. 17
Fig. 18
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
Conducting tests in accordance with DIN VDE 0701-0702, Example 1 – Devices with a protective conductor (PC I)
Fig. 19
23
The subsequent entry of the appliance type (Fig. 19) is not compulsory and
is automatically displayed for barcode entry. For manual entry you use the
[1/A] and [OK] buttons to reach this menu. Press the [OK] button if you do
not wish to enter any information here.
In the Main menu (Fig. 20) press the [to DIN VDE 0701-0702] button.
Fig. 20
DIN VDE 0751/EN 62353 at TG euro 1 med only