Table of Contents
Advertisement
USER MENU DESCRIPTIONS AND PROCEDURES
Factory-set defaults are shown in bold
NAME/COD
E
Selects the baud rate for data transmission through the serial port.
A1
Baud Rate
Selects the number of data bits and parity of serial transmission.
A2
Data Bits and
Parity
A3
Selects when data will be sent out of the serial port to a printer or computer:
Mode of Serial
Transmission
"d" = Demand mode; send data when a PRINT command is issued from the
A4
Actuates the function that illuminates all digit segments, decimal points, and
Display Check
LCD annunciators in a test sequence. Pressing the ZERO key to scroll
down one level begins the test sequence.
Allows the lb/kg key to be disabled so that an operator cannot accidentally
A5
Disable the
press the key and change the displayed units.
lb/kg Key
"0" = Disable the lb/kg key
Selects the mode of the RS-232 serial port: Refer to Bilaga B for more
A6
Serial Port
information.
Mode
A7
Allows the ID number to be disabled in the Print Ticket mode. Valid only
ID No. Enable
when A6 is set to "1".
"0" = Disable the ID No.
A8
Actuates the function that allows entry of a new ID No. Valid only when A6
ID No. Entry
is set to "1". Pressing the ZERO key to scroll down one level begins the
sequence.
A9
Actuates the function that allows entry of the desired number of line feeds to
No. of Line
be printed in Print Ticket Mode. Valid only when A6 is set to "1". Pressing
Feeds
the ZERO key to scroll down one level begins the sequence.
A10
Selects the auto off time period in minutes:
Auto Power
Off Period
.
DESCRIPTION
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits
"C" = Continuous mode; send data continuously
printer, computer, or indicator.
"0" = Full Duplex Mode
"1" = Print Ticket Mode
"1" = Enable the ID No.
"Off" = Disabled (Always ON)
"1" = Enable the lb/kg key
CODE/VALUE
1200
2400
4800
9600
8n
7O
7E
7n
C
d
Press ZERO key to
begin sequence
0 (CE)
1 (US)
0
1
0
1
0 - 199999 (500)
0 - 999999 (500E)
123456
0 - 99
5
Off
1, 2, 3, 5, 8,
10, 15, 20, 30
Manual page 10
Advertisement
Table of Contents
