Regulatory Compliance - Ameriphone AM6000 User Manual

Instrucciones de seguridad

Regulatory Compliance

importantespara el usuario
Part 68 of FCC Rules
Information
This AM-6000 Notification System
complies with Part 68 of the FCC
rules and the requirements
adopted by the ACTA. On the
bottom of this equipment is a label
that contains, among other
information, a product identifier in
the format US:AAAEQ##TXXXX. If
requested, this number must be
provided to the telephone
company.
A plug and jack used to connect
this equipment to the premises
wiring and telephone network
must comply with the applicable
FCC Part 68 rules and
requirements adopted by the
ACTA. A compliant telephone
cord and modular plug, RJ11
USOC, is provided with this
product. It is designed to be
connected to a compatible modular
jack that is also compliant. See
installation instructions for details.
The REN is used to determine the
number of devices that may be
18
connected to a telephone line.
Excessive RENs on a telephone
line may result in the devices not
ringing in response to an
incoming call. In most but not all
areas, the sum of RENs should not
exceed five (5.0). To be certain of
the number of devices that may be
connected to a line, as determined
by the total RENs, contact the
local telephone company. For
products approved after July 23,
2001, the REN for this product is
part of the product identifier that
has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN
without a decimal point (e.g., 03
is a REN of 0.3). For earlier
products, the REN is separately
shown on the label.
If this telephone equipment causes
harm to the telephone network,
the telephone company will notify
you in advance that temporary
discontinuance of service may be
required. But if advance notice
isn't practical, the telephone
company will notify the customer
as soon as possible. Also, you will