Ameriphone AM6000 User Manual page 12

Instrucciones de seguridad
OPERATIONS
importantespara el usuario
2. Door
The door indicator light illuminates
when the doorbell button is
pressed. The lamp will turn on for
two seconds, off for two seconds,
and repeat. This function is also
activated when a signal is
received from the optional Door
Announcer (Model AM-DX).
3. Clock/Paging
The clock indicator light illuminates
when the alarm clock is activated.
The bed shaker will vibrate and
the lamp will turn on for one
second, off for two seconds, and
repeat.
Alarm/Snooze
When the alarm clock activates,
the bedshaker will vibrate and the
lamp will flash for 24 seconds, or
until the LAMP CONTROL / RESET
button is pushed. When the LAMP
CONTROL / RESET button is
pushed, the bedshaker and lamp
will immediately turn off, and then
reactivate approximately 5 minutes
later, repeating the on/off pattern
16 times, or until the ALARM/
PAGE selector is moved to the OFF
position.
Paging
When the ALARM / PAGE switch is
momentarily moved to the PAGE
position, it activates the base unit
and any remote receivers or
personal signalers that are within
an 80-foot range. They activate for
one 24-second cycle. To repeat the
page, move the ALARM / PAGE
switch to PAGE again momentarily.
E
N
G
L
I
S
H
9