B.master Reset; C.notification Priority; D.security Timer - Ameriphone AM6000 User Manual

OPERATIONS
B. Master Reset
If you have several Alertmaster
system components (such as the
AM-6000, the AM-100, the
AM-RX2 and accessories), you can
save time by using the AM-6000
to reset all of them at once. To do
this, press the LAMP CONTROL /
RESET button and the SECURITY
TIMER button at the same time.
C. Notification Priority
If the Alertmaster system receives
two notification signals at the same
time, it will display the highest
priority signal. For example, if it
receives a Motion Sensor signal
right after it receives a Phone
signal, the indicator will change
from PHONE to SENSOR. The
priority for each notification signal
is shown as follows:
1. Master Reset
2. Audio Alarm
3. Baby Sound
4. Room Sound
5. Phone
6. Door
7. Paging
8. Alarm Clock
9. Random (Security) Timer
D. Security Timer
With this feature, the lamp
connected to your Alertmaster
system will go on automatically
every evening and turn off later in
the evening. You can use this to
make it look like someone is home.
The light will turn on and off at
slightly different times each
evening so it is not so obvious that
a timer is being used.
To activate this feature:
1.Set the MIC switch to ST. The
lamp will automatically go on
every evening at about 5 PM
and turn off at about 11 PM. To
confirm this setting, the clock
will blink twice every 5 seconds.
a.If you want the light to turn
on at about 6 PM, press
SECURITY TIMER once for 2
seconds or more. To confirm
this setting, the clock will blink
3 times every 5 seconds.
E
N
G
L
I
S
H
11