105 Conversion Unit, "Kc6" Option - Opel Movano X62 2010 Conversion Manualline

OPEL MOVANO (X62)
105 – CAN BUS- INTERFACE MODULE, "KC6" OPTION
Before working on the vehicle, refer to the "Electrical Connections" sheet.
The interface module is available as an option on all versions. This module can be used to recover certain
information that is available on the multiplexed network.
The module is attached on the right-hand side of the central dashboard console for both left- and right-
hand drive vehicles.
To recover the information from the interface module, the connection kit (part number 8200792947) needs
to be obtained (harness length: 600 mm).
CONNECTION KIT
For left-hand drive, the connection requires the storage box to be removed.
UNIT LOCATION
1
2
1: Interface module
2: Connection kit
N.B.:
To make sure that each wire in the connection kit is correctly assigned, it is advisable to check the electrical
continuity of the wiring before connection.
The unused wires should be insulated separately using a heat-shrinkable sleeve.
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
1
up-to-date data on body guidelines (online body guidelines). Data status June 2009