109 +12 V Current Distribution - Opel Movano X62 2010 Conversion Manualline

OPEL MOVANO (X62)
109 – +12 V CURRENT DISTRIBUTION
Before working on the vehicle, refer to the "Electrical Connections" sheet.
The +12 V current distribution power supply is a power supply that can be temporarily unavailable to save
the battery. An energy management system constantly checks the battery charge status.
Connecting electrical accessories while the engine is off will discharge the battery. Do not exceed the
maximum power consumption.
Electrical accessories that are connected must comply with the electromagnetic compatibility
requirements laid down in DIN VDE 40 839.
This +12 V current distribution power supply is available on the connectors of the "KPD" and "KC5" options
but also through the accessory sockets. Please refer to the sheets dealing with the "KPD" and "KC5"
options for further information.
A +12 V current distribution fused power supply can be obtained by using the accessory sockets (or
cigar lighter).
Two accessory sockets are available on the dashboard.
-
Upper accessory socket (10 A fuse F2 and F3 in the passenger compartment fuse and relay box),
-
Lower accessory socket (10 A fuse F4 in the passenger compartment fuse and relay box),
Depending on the version and options, an accessory socket is possible in the panel van's loading area.
The socket is located on the left-hand extreme rear pillar.
-
- Rear accessory socket (10 A fuse F4 in the passenger compartment fuse and relay box),
Important:
This +12 V current distribution supply is temporarily cut off when the starter motor is activated.
Do not connect any current-delivering accessories, e.g. electrical charging devices or batteries.
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status June 2009
1