Cleaning - cecotec Cumbia POWER MATIC-CCINO 9000 Series Instruction Manual

ENGLISH
Light
Choose if you want the coffee spout LED light to be always on, off or only on when coffee or
hot drinks are being dispensed.

4. CLEANING

Unplug the cable from the power supply before start the cleaning. Do not immerse the
appliance in water nor any other liquid during the cleaning.
Use a soft, dampened cloth to clean the outer part of the device.
The lack of maintenance and cleaning of the product may cause a deterioration on its surface
and affect its lifespan.
Do not use strong detergents, gasoline, powder abrasives or metal brushes to clean the device.
Store the appliance in a safe, dry and clean place when it is not going to be used for a long time.
Clean both the visible parts of the machine and the area beneath it in order to remove all
residues.
(Fig 26)
Cappuccinatore (Fig. 27)
After dispensing milk, the coffee maker will display the below warning.
Place the milk frother as shown on the drawing.
Press Ok to activate the milk frother's cleaning cycle.
Warning: During the cleaning cycle, steam and hot water will be discharged through the milk
frother and the coffee spout. Do not touch any of these elements until the cleaning cycle is
completed.
Milk frother (1) (Fig. 28)
Insert the milk frother into the machine.
Place the milk frother inside a glass of water and place another one below the milk dispenser.
Press the Milk icon to start cleaning.
Once the cycle is completed, empty the container and repeat the cleaning cycle until no milk
rests are observed.
Milk frother (2) (Fig. 29)
Press both sides of the milk frother and take it out from the coffee spout.
Introduce the milk frother in a glass of clean water.
Clean the wholes in the back of the device with the cleaning brush.
Reinstall the milk frother back to its position.
Note: The device will notify when this process is necessary.
54