Tolerances For Linear Dimensions - Pepperl+Fuchs VisuNet FLX RM-320P Series Manual

VisuNet FLX Panel
Introduction
2.5

Tolerances for Linear Dimensions

For all dimension drawings (e.g. dimension drawings, etc.) the European dimension standards
are valid.
All dimensions are in mm.
Unless otherwise specified, the following general tolerances are valid.
Nominal dimension ranges
Nominal dimension range
up to 6 mm
over 6 mm to 30 mm
over 30 mm to 120 mm
over 120 mm to 400 mm
over 400 mm to 1000 mm
General tolerance according to
DIN ISO 2768 medium
± 0.1 mm
± 0.2 mm
± 0.3 mm
± 0.5 mm
± 0.8 mm
7