Pepperl+Fuchs VisuNet FLX RM-320P Series Manual page 34

VisuNet FLX Panel
Electrical Installation
Wiring and Connecting the Terminal Block Field Input
1.
A three-position, screw-type connector (MC311-500) is provided for connecting power to the
VisuNet FLX panel.
Figure 5.3
2.
Connect a power source to the included power connector.
This connector supports wire size 4 mm
the connector to 0.5 Nm to 0.6 Nm. Secure the connector to VisuNet FLX panel.
Pin No.
-
+
Figure 5.4
34
Power connector is included in the delivery.
2
Allowed Cable Diameter
16 ... 12 AWG
(1.5 ... 4 mm²)
(~12-24 AWG). Torque the wire-retaining screws in