Advertisement
Assembly - Assembling the Fan without the Light Kit
1
Assembling the fan without light kit
NOTE: If you need a switch cup cover for the non-light option,
please call 1-855-HD-HAMPTON (M-F 9:00am to 4:30pm EST).
□
Remove the three light kit mounting screws (QQ) on the side
of switch cup cover.
□
Position the switch cup cover (not included) onto the switch
cup. Make sure the notch in the switch cup cover clears the
reversing switch in the switch cup of the fan-motor assembly
(B), and reinstall the light kit mounting screws (QQ).
Operation
Turn on the power and check the operation of the fan. The pull chain
controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right)
NOTE: Wait for the fan to stop before reversing the direction of the
blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a cooler setting
without affecting your comfort.
Switch cup
cover
XX
XX
11
Please contact 1-855-HD-HAMPTON for further assistance.
QQ
HAMPTONBAY.COM
Advertisement
