Tunstall Communicall Vi IP Manager User Manual page 17

Enter the ID of the fob by using the numeric keypad, only enter the group of 5 digits on the
rear of the fob. Once entered, press the button OK button.
Next assign a description of who the fob will be assigned too. This is a numeric description
generally the flat number. Use the SCPs keypad to enter a numeric description up to a
maximum of 5 digits. Once the description is entered press OK.
Now we must assign the fob to a group. The group the fob is assigned to decides which doors
the fob can release. The groups are pre-set at the time of installation and are recorded by the
installation team in the back of this manual.
When group is selected from the SCP menu, it is possible to scroll through the groups which
are referenced as a numeric value. When the correct group is selected press the OK key.
Once all the details have been entered for the fob, press the Save key.
ID :
_ _ _ _ _
Clear
OK
Description
_ _ _ _ _
Group
OK
Group
1
>
OK
ID
Description
Group
Save
Exit
Exit
Exit
Exit
17