Omax ProtoMAX Operation Manual page 21

e. Position the nozzle in the center of the tank, between two slats using the X, Y
Jog buttons or keyboard arrow keys.
f. Lower the nozzle to within 1 in. of the surface of the water.
NOTICE
Always hold the nozzle when loosening the hand knob. Do not let the nozzle fall
and strike the cutting deck slats or material to avoid damage to the nozzle and/or
nozzle components.
g. Close the lid.
h. Click Test [1].
i. In Test Operations, select Test Cutting Head (Pump, Jet, and Abrasive), and
click Next.
Figure 231
Figure 232
Figure 233