Omax ProtoMAX Operation Manual page 18

Startup Overview
1. Turn ON the laptop power.
NOTE:
Do not open MAKE. The ProtoMAX USB cable must be plugged in and recognized by the
laptop before opening the MAKE program.
2. Connect the ProtoMAX USB cable [1] to the laptop.
3. Turn ON the main power [2] and verify the light [1] is on.
4. Turn ON the incoming water supply.
5. Record the incoming water pressure
NOTE:
The incoming water pressure should be 45–85 psi.
Figure 223
Figure 224
(Figure 225).